Today’s mystery part

Peter1450

Zorg Guru (II)
Supporter
Joined
Apr 1, 2018
Points
104
Location
Bristol
Model of Z
Z3 3.0
It’s close to MOT time so I cleaned and adjusted the handbrake, whilst there I noticed the driver’s side drop link has worked it’s way off the anti roll bar, it failed last year on this.
Any idea why it comes off and only the offside?
So back to the mystery part……. Had to pull the rear bar out to press the drop link back on and this appeared on the floor, anyone know what it is? TIA
 

Attachments

Rudyrov

Zorg Guru (I)
American Zeds
Joined
Jan 29, 2014
Points
95
Location
Phoenix, AZ
Model of Z
2.8 L Roadster
Wow, MOT is a pain in the ASS.
I understand the state of California (USA) is starting a similar inspection program, more reasons not to go back there!
 

Lee

Zorg Expert (I)
British Zeds
M Power
#ZedShed
Joined
Mar 26, 2014
Points
213
Location
Basingstoke
Model of Z
Z4 Coupe 3.0si
It’s close to MOT time so I cleaned and adjusted the handbrake, whilst there I noticed the driver’s side drop link has worked it’s way off the anti roll bar, it failed last year on this.
Any idea why it comes off and only the offside?
So back to the mystery part……. Had to pull the rear bar out to press the drop link back on and this appeared on the floor, anyone know what it is? TIA
Goes around the spare wheel carrier. Attached to the spare wheel carrier itself.
 

Peter1450

Zorg Guru (II)
Supporter
Joined
Apr 1, 2018
Points
104
Location
Bristol
Model of Z
Z3 3.0
Brilliant thanks Lee , must have knocked it off wriggling the anti roll bar back in , although I never put the carrier back on when I rebuilt the back end .
 

Lee

Zorg Expert (I)
British Zeds
M Power
#ZedShed
Joined
Mar 26, 2014
Points
213
Location
Basingstoke
Model of Z
Z4 Coupe 3.0si
New drop link needed, check the bracket is round the right way.
 

Peter1450

Zorg Guru (II)
Supporter
Joined
Apr 1, 2018
Points
104
Location
Bristol
Model of Z
Z3 3.0
Is the u bracket on the bottom arm not symmetrical? I presumed it could go either way!
 
Top