Rebody Pingu's Kit Car Project

Pingu

Pingu

Zorg Guru (III)
3rd Party Trader
Joined
Dec 8, 2011
Points
145
Duncodin said:
Oh. Sorry. I take it back.

This video

zroadster.org

Rebody - Pingu's Kit Car Project

He can try. Blocked his number and he doesn't know where I live. I'm sure he could find out if he wants, but it wouldn't be worth his trouble. It wasn't anything dangerous. In fact, quite the opposite. Cut and taped wires inside the trunking. Wires cut short inside junction boxes and the...
zroadster.org zroadster.org

At the start where the dash is picked up and flipped over it looks like light reflecting off screw heads. I just slowed it right down and see its rwflection off the corners of the demist slots.

Sorry.

So you used grp? Will that stick to the plastic dash?
Click to expand...
No problem :) .

Yes - just roughen the plastic to create a key. I've found that fibreglass resin sticks to most things - hands, door knobs, kitchen worktops, Z3 dashboards... =))
 
Pond

Pond

Zorg Guru (III)
British Zeds
Joined
Dec 26, 2016
Points
144
Location
Spaldingski, Lincs
Model of Z
Z3 project
Pingu said:
No problem :) .

Yes - just roughen the plastic to create a key. I've found that fibreglass resin sticks to most things - hands, door knobs, kitchen worktops, Z3 dashboards... =))
Click to expand...
Good quality self-etching primer is also a good 'key' and saves a lot of hard work IME.
 
You must log in or register to reply here.
Top